Your cart is currently empty!
How To Fix A Torch Lighter That Won’t Click
Picture this: you’re ready to enjoy your favorite cigar or embark on a culinary adventure, but your trusty torch lighter refuses to produce that satisfying click and spark. Fret not! In this guide, we’ll unravel the mystery behind a silent torch lighter and explore practical steps to revive its ignition. From common causes to hands-on solutions, get ready to reignite the flame with our troubleshooting tips.
Common Causes of a Torch Lighter Not Clicking
In this exploration of the common causes behind a non-clicking torch lighter, we unravel the mysteries that often dampen moments of relaxation and culinary delight. From the straightforward depletion of butane to the subtle intricacies of the flint wheel, join us on a journey to understand why your torch lighter falls silent. Discover the reasons behind the silence and stay tuned for practical solutions that will have you reigniting the flame in no time.
- Butane Depletion: At the heart of many torch lighter troubles lies the simplest explanation—an empty fuel tank. Whether your lighter has been in storage or used extensively, a low butane level could be the root cause.
- Air Pocket Formation: Over time, air pockets may form within the lighter, disrupting the seamless flow of butane to the ignition system. This hiccup can result in a failure of the clicking mechanism.
- Flint Wheel Issues: The unsung hero of the ignition process, the flint wheel, can experience misalignment or wear and tear. This may hinder its ability to strike the flint effectively, leading to a silent lighter.
- Air Intake Obstruction: Debris, dust, or lint infiltrating the lighter’s air intake can disrupt the delicate balance of air and butane necessary for proper ignition, causing the lighter to fall silent.
- Improper Flame Height Adjustment: Fine-tuning the flame height is an often-overlooked aspect. If set too low, the lighter may struggle to generate a visible spark, leaving users puzzled and in the dark.
Navigating Troubleshooting Steps for Torch Lighter Revival
There are several simple ways to address issues with a lighter that won’t ignite on click. It’s essential to check the butane levels, eliminate potential air pockets, inspect the spark wheel, clean the air intake from debris, and adjust the flame height correctly. These steps will help you restore functionality to your lighter and enjoy the flame without unnecessary hassle.
- Check Butane Levels: Before delving into complex solutions, start with the basics. Ensure your torch lighter has a sufficient amount of butane, and if necessary, follow proper refilling procedures.
- Bleed Air Pockets: The process of purging the lighter by pressing the refill valve with a small tool aids in expelling any trapped air, restoring the smooth flow of butane to the ignition system.
- Inspect the Flint Wheel: Take a closer look at the flint wheel. If signs of misalignment or wear are evident, consider replacing it in accordance with the manufacturer’s recommendations to rejuvenate the clicking mechanism.
- Clean Air Intake: Delicate yet crucial, the air intake deserves attention. Use a can of compressed air or a small brush to meticulously clear any debris obstructing the pathway, ensuring an unobstructed airflow.
- Adjust Flame Height: Experiment with flame height adjustment, finding the sweet spot for optimal ignition. Avoid setting the flame too low, as it may compromise the generation of a robust spark.
- Perform a Test Ignition: Once troubleshooting is complete, conduct a test ignition in a safe environment. Listen for the reassuring click and observe the spark, signifying that your torch lighter is ready to illuminate once again.
DIY Troubleshooting or New Purchase – Weighing the Options
If none of the troubleshooting methods proves successful, you might want to consider the cost-effectiveness of repair versus purchasing a new lighter. Evaluate the extent of the issue – if it’s a simple fix, like replacing a worn flint wheel or cleaning out debris, repairing it yourself could be cost-effective. However, if the problem is more complex or involves internal components, professional repair may become more expensive.
On the other hand, if your current lighter is older or showing signs of extensive wear, and the cost of repair seems high, it might be more economical in the long run to invest in a new lighter. Newer models often come with improved features and technology.
In the end, the decision depends on the specific issue, the cost of repair, and your preference for either fixing the existing lighter or investing in a new one.
Comments
25 responses to “How To Fix A Torch Lighter That Won’t Click”
-
My kids bought me a new Scorch torch lighter for my birthday 1/24/24 I used it half a day now it won’t light 😞 I have a collection of lighters and Scorch is the biggest part of my collection, a free replacement would be awesome!
-
We’re happy to have such a big Scorch Torch fan among our readers! If your new Scorch torch lighter stopped working after a short period, and you’re looking into options for a replacement or repair, possibly under warranty, here’s how you can proceed:
Check the Warranty: Review the warranty policy for your Scorch torch lighter. Most reputable lighter brands offer a warranty that covers defects in materials and workmanship for a certain period. Given that your lighter was a recent gift, it’s likely still under warranty.
Contact Customer Service: Reach out to Scorch’s customer service department. Explain the situation, including the date when you received the lighter as a gift, how long it worked before stopping, and your extensive collection of their products. Highlighting your loyalty to the brand and your disappointment with the recent purchase can emphasize the importance of resolving the issue satisfactorily.
Request a Repair or Replacement: Ask if the warranty covers a free repair or replacement. Be prepared to provide proof of purchase or any details that can help establish the purchase date and authenticity of the lighter. Since the lighter stopped working so soon after receiving it, they may offer a replacement or free repair as a goodwill gesture.
-
-
Bought a brand new torch lighter and it clicked once and that’s all I got out of it. I’ve fixed many and would’ve taken this one back but live 45 minutes away from the shop. Needless to say, I’m not happy about this at all.
-
Buying a brand new torch lighter only to have it give up after one click would sour anyone’s day, especially when you’re a seasoned lighter fixer like yourself. It’s like finally getting a bite of your favorite cake and then dropping it on the floor – utterly disappointing!
Living 45 minutes away from the shop definitely adds to the frustration. It’s not just a quick hop back to sort it out. Here’s a virtual pat on the back for dealing with this annoying situation.
If you haven’t already, maybe give the shop a call or shoot them an email explaining the situation. They might be able to offer a solution that doesn’t require a 90-minute round trip. Who knows, they could even send a replacement your way to save you the journey.
Hang in there, and here’s hoping your next lighter sparks up a storm of reliability!
-
-
Having trouble with an MK torch lighter. When pushing the trigger itdoesntclick and is easily pushed down with no resistance.
-
Hi, Dora!
It sounds like your MK torch lighter’s ignition mechanism isn’t engaging properly. When the trigger presses down without resistance and doesn’t click, it often means something inside the mechanism is disconnected or broken. This could be due to a spring that’s come loose, a misalignment within the lighter, or a broken component in the trigger mechanism.While it’s a bit of a pickle, don’t lose hope! If you’re comfortable with DIY repairs and the lighter isn’t under warranty (or you’re okay with potentially voiding it), you might attempt to gently open the lighter to see if anything is visibly out of place or disconnected. However, proceed with caution, as working with lighters can be delicate and potentially dangerous due to the pressurized fuel.
If DIY isn’t your style or the lighter is still under warranty, the best move is to contact MK’s customer service for advice or to arrange a repair or replacement. They might have the perfect fix to get that trigger clicking satisfyingly again.
-
-
How about when you have burped it and when lit. Starts out fine, then turns into a big Gushing inferno.
What causes that and is it fixable?-
When your torch lighter starts with a normal flame but suddenly escalates to a gushing inferno, it’s like it’s auditioning for a role in a fire-breathing dragon movie! This dramatic flame behavior could be due to an overly generous fuel flow or a mischievous flame adjustment mechanism. Perhaps it’s been overfilled with butane, leading to its overzealous performance, or the flame adjustment is cranked up too high, making it unleash its inner volcano. Sometimes, even after burping, a bit of air might linger in the tank, causing this fiery outburst. And let’s not forget the nozzle—it needs to be clean and in good shape, or else it could turn your torch into a miniature flamethrower. Fixing this is usually a matter of balancing the fuel, tweaking the flame setting, or giving it a thorough clean. If your torch continues to act like it’s in a special effects scene, it might be time to call in the experts for a repair.
-
-
Nice facts.No mention of how to get the torches open , some show no visible ways of finding the inner workings.
-
Manufacturers often design torch lighters to keep the curious and the careless out of their delicate insides. This is to prevent accidents and ensure the lighter works correctly throughout its life. If there are no visible screws or access points, the lighter is likely not meant to be opened by the user.
In these cases, the best course of action is to consult the user manual or contact the manufacturer for advice. If the lighter needs repair or maintenance, it’s often safer and more effective to let professionals handle it, especially if it involves the intricate parts of the ignition mechanism.
-
-
Hi I bought the scorch pencil torch and was clicking it to light it and the top pushed up and stopped lighting and now it doesn’t sit correctly. I have purchased the same torch several times and I love it. I have never had one break on me the first day like this one. Could you please repair or replace it for me. I would be forever grateful.
Thank you
Brenna Klink
213-733-5420
340 n Madison Ave
Los Angeles, CA. 90004
[email protected]-
Hi, Brenna! Ah, got it 😄
For the grand refill tour, you’ll want to hit up places where the butane flows like the finest champagne:
Hardware Stores: Your local hardware haven is like the buffet for your torch, offering a gourmet selection of butane fuel.
Smoke Shops: These are the jazz clubs for lighters where your torch can get its groove back with high-quality fuel.
Online Marketplaces: Like ordering backstage passes, you can snag some premium butane from the comfort of your home.
Culinary Supply Stores: For the torch that prefers a taste of the high life, culinary shops offer butane that would make a chef’s heart sing.P.S.: I’ll keep my fingers crossed that your next Scorch torch doesn’t get too excited and jump the gun like this one!
-
-
I have a 3 flame scorch torch that has a fold out appendage on the back of the lighter & it has a hole thru it & I can’t figure out it’s purpose. Can you help? There is no way to upload a picture unfortunately.
-
It sounds like your 3-flame Scorch torch has a built-in feature that’s puzzling you! Based on your description of a fold-out appendage with a hole through it, it’s likely that this part of the lighter serves a specific function. Although I can’t see the lighter, I can make an educated guess:
This fold-out appendage with a hole could be a cigar punch. Cigar punches are used to create a clean hole in the cap of a cigar before smoking, providing a way to draw the smoke through without cutting off the entire cap. This tool is especially handy for cigar aficionados who prefer a punch cut over a straight cut or a V-cut, as it tends to preserve the cigar’s structure and allows for concentrated smoke flow.
The inclusion of a cigar punch on a torch lighter is quite common, especially in models designed for cigar smokers. It offers convenience by combining two essential tools in one device. To use it, you would unfold the punch, press it against the cap of the cigar, and twist to create a clean hole.
If you’re not a cigar smoker, this feature might not be particularly useful, but it’s a nice addition that adds versatility to your lighter. If this description doesn’t seem to match your lighter’s appendage, I’d recommend checking the product manual or contacting Scorch’s customer support for more details.
-
Dear Leroy Haskins III,
It seems like you’ve got yourself a touch light with a bit of stage fright, or maybe it’s just playing hard to get. Either way, we can’t have you sitting in the dark, poking at a light that won’t light up, can we?
Before we call in the touch light therapists, let’s try the classic ‘turn it off and on again’ trick. If that doesn’t work, it might be time to give it a good talking to. Something along the lines of, “Listen here, Light, you’ve got one job to do, and by golly, it’s time to shine!”
If all else fails, it might be time to march back to where you bought it and demand a light that’s as ready to work as you are. After all, a touch light that doesn’t light up is like a detective novel with no mystery: utterly pointless!
Keep your spirits high, Leroy. The right light is out there waiting for you, ready to illuminate your world with the slightest touch.
-
-
So I’m not sure my exact model torch i have but my boy gave it to me about 3 years ago.Let me tell you I use this thing every single day and not lightly either I beat this thing up. Ive dropped this thing soooo many times that the insulated tip have shattered and been super glued back together 3 or 4 times the case has a big ol crack in it theres a big ol crader burned into it.All the paints been worn off days and days ago.All the screws have been pipe theaded back in place or they wont stay.The valve in the bottom where you refill it at got stuck froze open where it would not hold butane so i found another torch and used it for a donner and bigo bango fixed it tahdah.When the day comes when i cant fix her ill probably lose it ive never owned a lighter a torch or what have you and had it last 3 years
-
Wow, Your attachment to it is totally understandable; it’s not just a tool but a trooper that’s been with you through thick and thin. It’s like that old car that’s held together with love, duct tape, and memories, still chugging along because you’ve given it the care it needs.
The way you’ve MacGyvered it back to life with parts from another torch and kept it going with super glue and pipe thread tape is seriously impressive. It’s clear you’ve got a knack for keeping things running, and this torch has become more than just an object—it’s a testament to your ingenuity and persistence.
When the day comes that it can’t be fixed, it’ll be like saying goodbye to an old friend, but until then, it sounds like you’re the torch whisperer, capable of keeping the flame alive against all odds. Here’s to many more years with your trusty torch, and when the time comes to retire it, may you find a worthy successor to carry on its legacy!
-
-
I have had my scorch torch lighter for about 3 years and it no longer ignites i replaced the butane and cleaned it but has no spark, has it just done its time and i should put it to rest and replace my faithful scorch?
-
If you’ve already tried refilling it with butane and cleaning it without any luck, and it’s no longer producing a spark, it might indeed be nearing the end of its lifecycle.
However, before you decide to retire your faithful torch, consider checking the ignition system one more time. Sometimes, the spark issue could be due to something fixable, like a misaligned igniter or a clogged nozzle, even after cleaning. If you’re comfortable and it’s safe to do so, you might want to take a closer look to see if there’s anything obviously amiss that can be adjusted or cleaned more thoroughly.
If after a thorough check and clean it still doesn’t spark, then it might be time to thank it for its service and find a new torch that can live up to the legacy of your current one. Three years of consistent use is a testament to its quality and your maintenance, so sticking with the Scorch brand could be a good idea if you’ve been happy with its performance.
-
-
Hi my name is James o have recently bought 2 different torches neither one ate more then week old …but knrs clicker stopped working ..the button is lose and just slides ip and down…the secondd one the plastic places are falling off. It’s not to good of lighter….plz helping send me email plz
-
Hey James,
It sounds like your new torches are throwing a bit of a tantrum, huh? One’s got a wobbly clicker playing slide-and-seek, and the other’s shedding plastic like it’s out of fashion! Here’s a quick game plan to get you back to a flame-worthy experience:
Warranty Wonders: These newbies should still be under warranty. Time to check those papers or receipts!
Seller SOS: Shoot a message or call where you bought them. “My torches are having a meltdown, can we fix this?” should get the ball rolling.
Manufacturer Mayday: If the seller plays hide-and-seek, ping the maker. “Hey, my torches are falling apart faster than my diet plans post-holidays. Help, please?”
Proof in Pictures: Snap some shots of the torch tragedy. It’s like sending a “Wish you were here” postcard, but for repairs.
Pack all that in a quick email, and you should be on your way to torch triumph!
-
-
I bought a brand new touch light and it will not work
-
Is there a diagram I can download or view for the scorch bullet torch. I have taken it apart and putting it back together is proving to be difficult.
-
Love the scorch lighters but it seems like the past year or so I haven’t found a touch that will last more then a tank. My favorite scorch lighter don’t click or spark. This is where i get burnt. I don’t keep my receipts; who really does for a $30 lighter. Even tho I don’t have my receipt can i still get some help.Love your lightes and want to continue using them. Thank you.
-
I have a neon yellow pencil torch that was sabotaged and I’m having trouble repairing it. Is there a warranty on these torche
Leave a Reply